Featuring a directional freeride shape, directional rocker profile and a mid-stiff flex, the Solution is playful in soft snow, yet confidence inspiring on steep, hard snow. For better float in pow, the Solution’s tapered shape sinks the tail and the 3D Contour Base makes every turn more fluid and effortless. For added response, the Solution is built with our premium Ultra core, Flax/Basalt Power stringers and an ECO-plastic topsheet. For added edge grip and torsional board lock, the Solution features Inner/Outer Traction Tech 3.0, plus Karakoram Tip-Lock clips that lock closed, and Karakoram Ultra Clips 2.0 that are smaller and lighter than the original Ultra clip design.
_x000D_
3D Contour Base
_x000D_
3D Contour Base 3.0
_x000D_
Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.
_x000D_
_x000D_
Shape Tech
_x000D_
_x000D_
1. Inside & outside Traction Tech 2.0
Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.
_x000D_
Inner edge Traction Tech
_x000D_
Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.
_x000D_
2. Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
_x000D_
3. Quick Tension Tail Clip
Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.
_x000D_
4. Boltless Bridge
The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker, providing better torsional stiffness and a more powerful connection at the split clips.
_x000D_
Tapered shape, 12.5 mm
The tapered shape sinks the tail in pow for better float and quicker turns.
_x000D_
Blunt nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones
_x000D_
Profile
_x000D_
Directional Rocker
_x000D_
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
_x000D_
_x000D_
_x000D_
_x000D_
Built with the finest tech and materials
_x000D_
100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.
_x000D_
Base
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
_x000D_
Flip-Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
_x000D_
Sintered 9900 Base
Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.
_x000D_
Extra hardware
Karakoram Ultra Clips 2.0 with Tip-Lock
Redesigned Karakoram Ultra Clips 2.0 are lighter weight, clamp tighter and have a smaller footprint than the original Ultra Clip. They are also adjustable so you can maintain even compression as your splitboard ages.
_x000D_
Fiber
Triax fiberglass
Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.
_x000D_
Other features
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
_x000D_
Inner thin recycled edges
Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.
_x000D_
Outer oversized recycled edges
Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.
_x000D_
Stainless steel reinforcement
Stainless steel plates are embedded into the nose and tail for improved board tip durability.
_x000D_
Recycled rounded ABS
Rounded sidewall finish that improves board durability by protecting topsheet from chipping.
_x000D_
Forever Flex
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.
_x000D_
Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.
_x000D_
Reinforcements
Sustainable Flax/Basalt Power stringers
Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to eliminate nose and tail chatter.
_x000D_
Topsheet
Textured Eco-plastic topsheet
Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).
_x000D_
Woodcore
Ultra Split Core
Dual density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.
_x000D_
_x000D_
_x000D_
_x000D_
| Size | _x000D_
154 | _x000D_
158 | _x000D_
159W | _x000D_
161 | _x000D_
162W | _x000D_
164 | _x000D_
165W | _x000D_
167 | _x000D_
169W | _x000D_
_x000D_
_x000D_
_x000D_
_x000D_
| Effective Edge (mm) | _x000D_
1142 | _x000D_
1176 | _x000D_
1180 | _x000D_
1200 | _x000D_
1210 | _x000D_
1226 | _x000D_
1234 | _x000D_
1246 | _x000D_
1266 | _x000D_
_x000D_
_x000D_
| Tip Width (mm) | _x000D_
292 | _x000D_
294 | _x000D_
307 | _x000D_
296 | _x000D_
307 | _x000D_
299 | _x000D_
311 | _x000D_
305 | _x000D_
317 | _x000D_
_x000D_
_x000D_
| Waist Width (mm) | _x000D_
246 | _x000D_
249 | _x000D_
263 | _x000D_
252 | _x000D_
263 | _x000D_
254 | _x000D_
266 | _x000D_
259 | _x000D_
270 | _x000D_
_x000D_
_x000D_
| Tail Width (mm) | _x000D_
278 | _x000D_
281 | _x000D_
295 | _x000D_
283 | _x000D_
294 | _x000D_
286 | _x000D_
298 | _x000D_
292 | _x000D_
304 | _x000D_
_x000D_
_x000D_
| Sidecut Radius (m) | _x000D_
7.9 | _x000D_
8.5 | _x000D_
8.7 | _x000D_
9.1 | _x000D_
9.3 | _x000D_
9.3 | _x000D_
9.4 | _x000D_
9.4 | _x000D_
9.5 | _x000D_
_x000D_
_x000D_
| Stance Setback (mm) | _x000D_
20 | _x000D_
20 | _x000D_
20 | _x000D_
20 | _x000D_
20 | _x000D_
20 | _x000D_
20 | _x000D_
20 | _x000D_
20 | _x000D_
_x000D_
_x000D_
| Rider Weight (lbs) | _x000D_
120 - 170 | _x000D_
130 - 180 | _x000D_
140 - 190 | _x000D_
140 - 190 | _x000D_
160 - 210 | _x000D_
160 - 210 | _x000D_
160 - 210 | _x000D_
160 - 210 | _x000D_
170 - 220 | _x000D_
_x000D_
_x000D_
| Width | _x000D_
Regular | _x000D_
Regular | _x000D_
Wide | _x000D_
Regular | _x000D_
Wide | _x000D_
Regular | _x000D_
Wide | _x000D_
Regular | _x000D_
Wide | _x000D_
_x000D_
_x000D_
